Smørefett ENI Grease LCX 2 / 400 g

APPLICATIONS:
Eni Grease LCX 2/220 is a lithium complex grease, formulated with synthetic base oil of
viscosity ISO VG 220 that allow the grease to operate at very low temperatures.
The particular combination of anti-wear, EP, anticorrosive and anti-oxidant additives guarantees
excellent performance in severe operating conditions such as high loads and in presence of
vibrations.
In addition, the synthetic base gives a high thermal and oxidative stability over time, allowing a
reduction of downtime cases and maintenance costs.
Eni Grease LCX 2/220 is recommended for high temperature and high load applications such
as lubrication of bearings and other parts operating under severe conditions (joints, bearings of
paper mills, rolling mill bearings, flat bearings and rolling bearings exposed to water washout).

CUSTOMER ADVANTAGES:
• Suitable for applications at high and low temperature thanks to the nature of the synthetic
base and the very high dropping point
• Extension of service life and relubrication intervals, even in the presence of strong
mechanical and thermal stresses
• Excellent adhesiveness and resistance to water washout. Can be used in humid
environments and in the presence of water
• Good loads resistance
• High anti-rust and anti-corrosion protection and compatibility with all types of metals both
ferrous and non-ferrous

SPECIFICATIONS – APPROVALS:
• ISO 12924 L-XDEHB 2
• DIN 51825 KPHC 2P -40

CHARACTERISTICS:
Properties Method Unit Typical
Appearance – – smooth-textured
homogeneous
Colour – – gray/beige opaque
Thickener type – – litio complesso
Consistency (NLGI grade) ASTM D 217 – 2
Penetration at 60 double stroke ASTM D 217 dmm 280
Base oil type – – sintetico
Base Oil Viscosity at 40°C ASTM D 7042 mm²/s 220
Dropping point ASTM D 566 °C 290
EMCOR test in distilled water IP 220 – 0/0
Corrosion ASTM D 1743 – supera
Copper corrosion ASTM D 4048 – 1a
Timken OK load ASTM D 2509 lbs >45
4 Balls weld load ASTM D 2596 daN 400
Temperature range – °C -40/+160